Plot Report
-----------

Report Written:     Tuesday, September 19, 2017
Design Path:        C:\Users\Gary Hoffmann\Google Drive\DesignSpark PCB\PV Combined regulator.pcb
Design Title:       
Created:            5/09/2017 6:37:01 PM
Last Saved:         19/09/2017 1:38:38 PM
Editing Time:       16192 min
Units:              mm (precision 1)


Device Settings
===============


Gerber Settings
===============

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.5 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.


Drill Settings
==============

    Excellon Format 1    Format 3.5 absolute in inches.
    No zero suppression.


Plots Output
============

    Plot Job: "C:\Users\Gary Hoffmann\Google Drive\DesignSpark PCB\PV Combined regulator.mop"


Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Top Silkscreen.gbr

    Layers:
    ------------------
    Top Silkscreen

    D-Code Shape  (thou)
    -----------------------
    D10    Round 25.00
    D29    Round 10.00
    D73    Round 12.00
    D95    Round 20.00
    D96    Round 7.87
    D97    Round 1.00
    D99    Round 5.00
    D100   Round 6.72
    D101   Round 4.80
    D102   Round 9.90
    D103   Round 5.60
    D104   Round 19.69
    D105   Round 9.84
    D106   Round 6.00
    D107   Round 3.00
    D108   Round 4.00

Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Top Solder Mask.gbr

    Layers:
    -------------------
    Top Solder Mask

    D-Code Shape  (thou)
    -----------------------------
    D10    Round 25.00
    D79    Round 84.74
    D80    Round 66.00
    D81    Square 84.74
    D82    Square 112.89
    D83    Round 112.89
    D84    Square 71.00
    D85    Round 71.00
    D86    Round 57.18
    D87    Square 61.00
    D88    Round 61.00
    D89    Round 86.00
    D90    Square 69.00
    D91    Round 69.00
    D92    Round 163.48
    D93    Square 66.00
    D94    Round 46.00
    D150   Oval 66.00 X 126.00
    D151   Round 50.09
    D152   Octagon 36.00

Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Top Copper.gbr

    Layers:
    --------------
    Top Copper

    D-Code Shape  (thou)
    -----------------------------
    D10    Round 25.00
    D11    Round 3.94
    D12    Round 78.74
    D13    Round 60.00
    D14    Square 78.74
    D15    Square 106.89
    D16    Round 106.89
    D17    Square 65.00
    D18    Round 65.00
    D19    Round 51.18
    D70    Square 55.00
    D71    Round 55.00
    D20    Round 80.00
    D21    Square 63.00
    D22    Round 63.00
    D23    Round 157.48
    D24    Oval 60.00 X 120.00
    D25    Square 60.00
    D26    Round 44.09
    D27    Octagon 36.00
    D28    Round 40.00
    D29    Round 10.00
    D72    Round 39.37
    D73    Round 12.00

Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Documentation.gbr

    Layers:
    -----------------
    Documentation

    D-Code Shape  (thou)
    -----------------------
    D74    Round 0.04
    D75    Round 1.97

Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Bottom Copper.gbr

    Layers:
    -----------------
    Bottom Copper

    D-Code Shape  (thou)
    -----------------------------
    D10    Round 25.00
    D11    Round 3.94
    D12    Round 78.74
    D13    Round 60.00
    D14    Square 78.74
    D15    Square 106.89
    D16    Round 106.89
    D17    Square 65.00
    D18    Round 65.00
    D19    Round 51.18
    D70    Square 55.00
    D71    Round 55.00
    D20    Round 80.00
    D21    Square 63.00
    D22    Round 63.00
    D23    Round 157.48
    D24    Oval 60.00 X 120.00
    D25    Square 60.00
    D26    Round 44.09
    D27    Octagon 36.00
    D28    Round 40.00
    D29    Round 10.00
    D72    Round 39.37
    D76    Round 118.11
    D77    Round 16.00
    D78    Round 70.87

Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Bottom Solder Mask.gbr

    Layers:
    ----------------------
    Bottom Solder Mask

    D-Code Shape  (thou)
    -----------------------------
    D10    Round 25.00
    D79    Round 84.74
    D80    Round 66.00
    D81    Square 84.74
    D82    Square 112.89
    D83    Round 112.89
    D84    Square 71.00
    D85    Round 71.00
    D86    Round 57.18
    D87    Square 61.00
    D88    Round 61.00
    D89    Round 86.00
    D90    Square 69.00
    D91    Round 69.00
    D92    Round 163.48
    D93    Square 66.00
    D94    Round 46.00
    D150   Oval 66.00 X 126.00
    D151   Round 50.09
    D152   Octagon 36.00

Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Bottom Silkscreen.gbr

    Layers:
    ---------------------
    Bottom Silkscreen

    D-Code Shape  (thou)
    -----------------------
    D95    Round 20.00
    D96    Round 7.87
    D97    Round 1.00
    D99    Round 5.00

NC Drill Output
===============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Drill Data - [Through Hole].drl

    Output:
    ---------------------------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    Tool  Size         Count   ID
    ------------------------------------
    T001  000.01600 in 3     L
    T002  000.02400 in 20    U
    T003  000.02717 in 3     Z
    T004  000.03150 in 4     B
    T005  000.03200 in 10    F
    T006  000.03500 in 73    E
    T007  000.03937 in 30    C
    T008  000.04000 in 49    H
    T009  000.04300 in 4     G
    T010  000.04500 in 8     D
    T011  000.05000 in 4     J
    T012  000.05906 in 30    Y
    T013  000.07126 in 3     X
    ------------------------------------
    Total              241
    ------------------------------------

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Drill Data - [Through Hole] (Unplated).drl

    Output:
    -----------------------------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    Tool  Size         Count   ID
    ------------------------------------
    T001  000.02500 in 1
    ------------------------------------
    Total              1
    ------------------------------------


Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Drill Ident Drawing - [Through Hole].gbr

    Layers:
    ------------------
    [Through Hole]


Drill Ident Drawing
===================

    Drill Plated Size Shape ID
    -----------------------------------
    31    Y      100  Round B
    39    Y      100  Round C
    45    Y      100  Round D
    35    Y      100  Round E
    32    Y      100  Round F
    43    Y      100  Round G
    40    Y      100  Round H
    50    Y      100  Round J
    16    Y      100  Round L
    24    Y      100  Round U
    71    Y      100  Round X
    59    Y      100  Round Y
    27    Y      100  Round Z

    D-Code Shape  (thou)
    -----------------------
    D98    Round 100.00
    D99    Round 5.00

Gerber Output
=============

C:\Users\Gary Hoffmann\Google Drive\Inverter Oz Stuff\Charge Contro\GTI REG SLAV\PV Combined regulator - Board Outline.gbr

    Layers:
    ------------------
    Board Outlines

    D-Code Shape  (thou)
    -----------------------
    D10    Round 25.00

End Of Report.
